!["Crystal Lens Clearness Avoiding Videography Haze"](https://www.lifewire.com/thmb/lwyffvP10dLE4EinuE3HUVO38bo=/400x300/filters:no_upscale():max_bytes(150000):strip_icc():format(webp)/GettyImages-1342255561-483b636ee00f40a1b3d91d1969b1aaf6.jpg)
"Crystal Lens Clearness Avoiding Videography Haze"
![](/images/site-logo.png)
Crystal Lens Clearness: Avoiding Videography Haze
How to Avoid and Eliminate Fog on GoPro Lens/Housing
Max Wales
Mar 27, 2024• Proven solutions
Shooting a motion video under the water while diving or during a sporting like surfboarding can be a wonderful experience. Everybody expects to capture some magnificent water videos during adventurous expeditions. However, foggy layers due to the water condensation on the surface of your camera lenses can pose problems and result in poor and hazy picture output. Assorting proper measures, you can easily eliminate these limitations and shoot high-resolution water videos. Here are some effective ways to deal with GoPro fog problems and shoot clear water videos.
Why Does Fog Accumulate on Your GoPro Camera
The GoPro Hero series cameras are fully protected by the waterproof casing. The case does not allow water from outside to penetrate inside and vice versa. This often causes the problem of fogging. If there are traces of moisture/humidity inside the case for some reason and the external temperature is cold, the condition leads to the condensation of the traces of humidity inside the device. This condensed moisture traces accumulate on the lenses forming foggy layer.
The fogging up on the camera lenses due to moisture presence inside the device is a common occurrence during winter water sports due to greater difference in external and internal temperatures.
Best Ways to Avoid or Eliminate Fog on GoPro Camera Lenses
The easiest solution to prevent GoPro fog deposition issues is to take out the moisture trapped inside the camera device. If there is no moisture residue inside, there will not be any chances of condensation problems. Following are some convenient options to eliminate fog from GoPro camera.
Use Anti-fog Inserts
The anti-fog inserts are reusable low cost drying agents with superb capacity to absorb water molecules. The commercial grade anti-fog inserts contain silica gel of very high quality with cellulose fiber. The gel packed in small sacks is often provided inside electronic goods to keep the moisture away. When you insert the silica bags inside the camera, it will readily soak the moisture. You can take out the bag and dry it naturally or in the microwave oven for future use.
Best recommendations:
1. GoPro Anti Fog Inserts - $15.39
A single pack of GoPro Anti Fog Insert contains 12 sacks of silica gel. Each sack is compatible for up to 4 uses. These sacks require regular drying after every use. You can apply 300-degree temperature heating in the oven for five minutes to complete the drying process. After using and drying, store the inserts in airtight container.
2. CamKix Anti-fog Inserts - $5.69
These inserts are affordable compared to the GoPro inserts in terms of price and product quantity. A single pack contains 20 sacks of silica gel inserts. The size of the sacks and product quality is compatible for using in all GoPro camera models. These reusable sacks can be dried in the oven at 300 degree Fahrenheit.
3. Wose Anti-fog inserts - $5.59
Comparing the price of all the three anti fog inserts, you will find Wose as the cheapest product in the market. You will get 24 pieces of silica gel sacks in a pack of Wose inserts. The sacks contain 3M adhesive material of extra strong industrial grade. These sacks are also compatible for multiple usages after drying in the oven as mentioned above.
DIY GoPro Anti-fog insert
The major drawback of using the GoPro anti-fog inserts is the cost factor. On average, the cost of a pack of 12 inserts is $15. The pack is sufficient for using 4 times. With a simple DIY method, you can save the dollars. Follow these simple steps to soak all the moisture in your camera.
Step 1: Take a thick paper towel and cut strips of 0.75”x3” dimension.
Step 2: Fold the strips in rectangular shape in a way that you can place them firmly inside the camera case.
Step 3: The size of your GoPro camera will depend on the version you possess. Place the folded paper towel pieces inside the case on the camera everywhere so that it absorbs moisture from all parts. You may need 3 to 6 paper pieces to soak the moisture completely.
Max Wales
Max Wales is a writer and a lover of all things video.
Follow @Max Wales
Max Wales
Mar 27, 2024• Proven solutions
Shooting a motion video under the water while diving or during a sporting like surfboarding can be a wonderful experience. Everybody expects to capture some magnificent water videos during adventurous expeditions. However, foggy layers due to the water condensation on the surface of your camera lenses can pose problems and result in poor and hazy picture output. Assorting proper measures, you can easily eliminate these limitations and shoot high-resolution water videos. Here are some effective ways to deal with GoPro fog problems and shoot clear water videos.
Why Does Fog Accumulate on Your GoPro Camera
The GoPro Hero series cameras are fully protected by the waterproof casing. The case does not allow water from outside to penetrate inside and vice versa. This often causes the problem of fogging. If there are traces of moisture/humidity inside the case for some reason and the external temperature is cold, the condition leads to the condensation of the traces of humidity inside the device. This condensed moisture traces accumulate on the lenses forming foggy layer.
The fogging up on the camera lenses due to moisture presence inside the device is a common occurrence during winter water sports due to greater difference in external and internal temperatures.
Best Ways to Avoid or Eliminate Fog on GoPro Camera Lenses
The easiest solution to prevent GoPro fog deposition issues is to take out the moisture trapped inside the camera device. If there is no moisture residue inside, there will not be any chances of condensation problems. Following are some convenient options to eliminate fog from GoPro camera.
Use Anti-fog Inserts
The anti-fog inserts are reusable low cost drying agents with superb capacity to absorb water molecules. The commercial grade anti-fog inserts contain silica gel of very high quality with cellulose fiber. The gel packed in small sacks is often provided inside electronic goods to keep the moisture away. When you insert the silica bags inside the camera, it will readily soak the moisture. You can take out the bag and dry it naturally or in the microwave oven for future use.
Best recommendations:
1. GoPro Anti Fog Inserts - $15.39
A single pack of GoPro Anti Fog Insert contains 12 sacks of silica gel. Each sack is compatible for up to 4 uses. These sacks require regular drying after every use. You can apply 300-degree temperature heating in the oven for five minutes to complete the drying process. After using and drying, store the inserts in airtight container.
2. CamKix Anti-fog Inserts - $5.69
These inserts are affordable compared to the GoPro inserts in terms of price and product quantity. A single pack contains 20 sacks of silica gel inserts. The size of the sacks and product quality is compatible for using in all GoPro camera models. These reusable sacks can be dried in the oven at 300 degree Fahrenheit.
3. Wose Anti-fog inserts - $5.59
Comparing the price of all the three anti fog inserts, you will find Wose as the cheapest product in the market. You will get 24 pieces of silica gel sacks in a pack of Wose inserts. The sacks contain 3M adhesive material of extra strong industrial grade. These sacks are also compatible for multiple usages after drying in the oven as mentioned above.
DIY GoPro Anti-fog insert
The major drawback of using the GoPro anti-fog inserts is the cost factor. On average, the cost of a pack of 12 inserts is $15. The pack is sufficient for using 4 times. With a simple DIY method, you can save the dollars. Follow these simple steps to soak all the moisture in your camera.
Step 1: Take a thick paper towel and cut strips of 0.75”x3” dimension.
Step 2: Fold the strips in rectangular shape in a way that you can place them firmly inside the camera case.
Step 3: The size of your GoPro camera will depend on the version you possess. Place the folded paper towel pieces inside the case on the camera everywhere so that it absorbs moisture from all parts. You may need 3 to 6 paper pieces to soak the moisture completely.
Max Wales
Max Wales is a writer and a lover of all things video.
Follow @Max Wales
Max Wales
Mar 27, 2024• Proven solutions
Shooting a motion video under the water while diving or during a sporting like surfboarding can be a wonderful experience. Everybody expects to capture some magnificent water videos during adventurous expeditions. However, foggy layers due to the water condensation on the surface of your camera lenses can pose problems and result in poor and hazy picture output. Assorting proper measures, you can easily eliminate these limitations and shoot high-resolution water videos. Here are some effective ways to deal with GoPro fog problems and shoot clear water videos.
Why Does Fog Accumulate on Your GoPro Camera
The GoPro Hero series cameras are fully protected by the waterproof casing. The case does not allow water from outside to penetrate inside and vice versa. This often causes the problem of fogging. If there are traces of moisture/humidity inside the case for some reason and the external temperature is cold, the condition leads to the condensation of the traces of humidity inside the device. This condensed moisture traces accumulate on the lenses forming foggy layer.
The fogging up on the camera lenses due to moisture presence inside the device is a common occurrence during winter water sports due to greater difference in external and internal temperatures.
Best Ways to Avoid or Eliminate Fog on GoPro Camera Lenses
The easiest solution to prevent GoPro fog deposition issues is to take out the moisture trapped inside the camera device. If there is no moisture residue inside, there will not be any chances of condensation problems. Following are some convenient options to eliminate fog from GoPro camera.
Use Anti-fog Inserts
The anti-fog inserts are reusable low cost drying agents with superb capacity to absorb water molecules. The commercial grade anti-fog inserts contain silica gel of very high quality with cellulose fiber. The gel packed in small sacks is often provided inside electronic goods to keep the moisture away. When you insert the silica bags inside the camera, it will readily soak the moisture. You can take out the bag and dry it naturally or in the microwave oven for future use.
Best recommendations:
1. GoPro Anti Fog Inserts - $15.39
A single pack of GoPro Anti Fog Insert contains 12 sacks of silica gel. Each sack is compatible for up to 4 uses. These sacks require regular drying after every use. You can apply 300-degree temperature heating in the oven for five minutes to complete the drying process. After using and drying, store the inserts in airtight container.
2. CamKix Anti-fog Inserts - $5.69
These inserts are affordable compared to the GoPro inserts in terms of price and product quantity. A single pack contains 20 sacks of silica gel inserts. The size of the sacks and product quality is compatible for using in all GoPro camera models. These reusable sacks can be dried in the oven at 300 degree Fahrenheit.
3. Wose Anti-fog inserts - $5.59
Comparing the price of all the three anti fog inserts, you will find Wose as the cheapest product in the market. You will get 24 pieces of silica gel sacks in a pack of Wose inserts. The sacks contain 3M adhesive material of extra strong industrial grade. These sacks are also compatible for multiple usages after drying in the oven as mentioned above.
DIY GoPro Anti-fog insert
The major drawback of using the GoPro anti-fog inserts is the cost factor. On average, the cost of a pack of 12 inserts is $15. The pack is sufficient for using 4 times. With a simple DIY method, you can save the dollars. Follow these simple steps to soak all the moisture in your camera.
Step 1: Take a thick paper towel and cut strips of 0.75”x3” dimension.
Step 2: Fold the strips in rectangular shape in a way that you can place them firmly inside the camera case.
Step 3: The size of your GoPro camera will depend on the version you possess. Place the folded paper towel pieces inside the case on the camera everywhere so that it absorbs moisture from all parts. You may need 3 to 6 paper pieces to soak the moisture completely.
Max Wales
Max Wales is a writer and a lover of all things video.
Follow @Max Wales
Max Wales
Mar 27, 2024• Proven solutions
Shooting a motion video under the water while diving or during a sporting like surfboarding can be a wonderful experience. Everybody expects to capture some magnificent water videos during adventurous expeditions. However, foggy layers due to the water condensation on the surface of your camera lenses can pose problems and result in poor and hazy picture output. Assorting proper measures, you can easily eliminate these limitations and shoot high-resolution water videos. Here are some effective ways to deal with GoPro fog problems and shoot clear water videos.
Why Does Fog Accumulate on Your GoPro Camera
The GoPro Hero series cameras are fully protected by the waterproof casing. The case does not allow water from outside to penetrate inside and vice versa. This often causes the problem of fogging. If there are traces of moisture/humidity inside the case for some reason and the external temperature is cold, the condition leads to the condensation of the traces of humidity inside the device. This condensed moisture traces accumulate on the lenses forming foggy layer.
The fogging up on the camera lenses due to moisture presence inside the device is a common occurrence during winter water sports due to greater difference in external and internal temperatures.
Best Ways to Avoid or Eliminate Fog on GoPro Camera Lenses
The easiest solution to prevent GoPro fog deposition issues is to take out the moisture trapped inside the camera device. If there is no moisture residue inside, there will not be any chances of condensation problems. Following are some convenient options to eliminate fog from GoPro camera.
Use Anti-fog Inserts
The anti-fog inserts are reusable low cost drying agents with superb capacity to absorb water molecules. The commercial grade anti-fog inserts contain silica gel of very high quality with cellulose fiber. The gel packed in small sacks is often provided inside electronic goods to keep the moisture away. When you insert the silica bags inside the camera, it will readily soak the moisture. You can take out the bag and dry it naturally or in the microwave oven for future use.
Best recommendations:
1. GoPro Anti Fog Inserts - $15.39
A single pack of GoPro Anti Fog Insert contains 12 sacks of silica gel. Each sack is compatible for up to 4 uses. These sacks require regular drying after every use. You can apply 300-degree temperature heating in the oven for five minutes to complete the drying process. After using and drying, store the inserts in airtight container.
2. CamKix Anti-fog Inserts - $5.69
These inserts are affordable compared to the GoPro inserts in terms of price and product quantity. A single pack contains 20 sacks of silica gel inserts. The size of the sacks and product quality is compatible for using in all GoPro camera models. These reusable sacks can be dried in the oven at 300 degree Fahrenheit.
3. Wose Anti-fog inserts - $5.59
Comparing the price of all the three anti fog inserts, you will find Wose as the cheapest product in the market. You will get 24 pieces of silica gel sacks in a pack of Wose inserts. The sacks contain 3M adhesive material of extra strong industrial grade. These sacks are also compatible for multiple usages after drying in the oven as mentioned above.
DIY GoPro Anti-fog insert
The major drawback of using the GoPro anti-fog inserts is the cost factor. On average, the cost of a pack of 12 inserts is $15. The pack is sufficient for using 4 times. With a simple DIY method, you can save the dollars. Follow these simple steps to soak all the moisture in your camera.
Step 1: Take a thick paper towel and cut strips of 0.75”x3” dimension.
Step 2: Fold the strips in rectangular shape in a way that you can place them firmly inside the camera case.
Step 3: The size of your GoPro camera will depend on the version you possess. Place the folded paper towel pieces inside the case on the camera everywhere so that it absorbs moisture from all parts. You may need 3 to 6 paper pieces to soak the moisture completely.
Max Wales
Max Wales is a writer and a lover of all things video.
Follow @Max Wales
Also read:
- Shooting for Beginners Best Cams Reviewed 2024 Edition
- [Updated] Bridging Moments A Kinemaster Guide to Transitions
- Creative Annotation Warping Tactics
- 2024 Approved Adobe Audition's Guide to Incremental Volume
- The Insider's Look at Creating Movies Using Windows 8 Movie Maker
- 2024 Approved Blending Images and Audio for Dynamic Videos
- [Updated] A Laugh Away in Time The 'Goofy Movie' Remastered
- Cutting-Edge Software Transform and Tweet Videos
- Masterclass in Virtual Reality Critical Oculus Player Insights
- Comprehensive Breakdown VSCO Photography Tools
- Superior Script Architect Space
- Podcasts Vs. YouTube Which One Is the Right Choice?
- Aspect Modification at Your Fingertips Online for 2024
- Create Your Own WhatsApp Ringtone - A Comprehensive Guide to iOS & Android for 2024
- Integrating Zoom's Features for Enhanced Facebook LIVE
- Focusing the Lens Detailed Film Techniques
- 2023 Guide to Excellent Waterproof Video Gadgets for 2024
- Essentials of Animated Visual Communication
- In 2024, Affordable Aerial Cameras Top Picks Under $100
- In 2024, Craft Magical Time Lapse Video Using a GoPro
- Budget-Oriented China's VR Equipment Selection for 2024
- Ultimate Guide to Laughing Photo Editing Tools (iOS/Android)
- Essential Techniques in Producing Persuasive Video Testimonials
- In 2024, ChortleChorus Choosing the Happiest Websites for Ringtones
- [Updated] A Fresh Perspective on Sony Blu-Ray S6500 Features
- How to Fix the Soft Bricked Xiaomi Redmi Note 12 Pro 5G? | Dr.fone
- New Unlock the Power of Shotcut The Ultimate Guide to Rotating Videos
- [New] Techniques for Modifying Photo Genders on Major Social Platforms for 2024
- [New] 2024 Approved Comparative Review Finding Your Team's Preferred Chat Application - Slack or Discord?
- What is the best Pokemon for pokemon pvp ranking On Realme 12 Pro+ 5G? | Dr.fone
- In 2024, Planning to Use a Pokemon Go Joystick on Realme GT 5? | Dr.fone
- 2024 Approved Echoes of Now Strategies for Downloading Current Events
- 6 Fixes to Unfortunately WhatsApp has stopped Error Popups On Motorola Moto G13 | Dr.fone
- New 2024 Approved Top-Rated Online WebM Video Minifiers
- In 2024, 5 Ways to Track Samsung Galaxy S23+ without App | Dr.fone
- In 2024, Best Ways on How to Unlock/Bypass/Swipe/Remove Samsung Galaxy S24 Fingerprint Lock
- In 2024, Pokemon Go Error 12 Failed to Detect Location On Vivo S18e? | Dr.fone
- Updated 2024 Approved Unlock The Secrets How To Remove Wind Noise From Audio
- [New] 2024 Approved Exclusive Guide Stylish TikTok Profile Pictures
- Music Magic for Instagram A Guide
- [Updated] 2024 Approved Cutting-Edge Speech-to-Text Google’s Pathway for Precision
- In 2024, How to Factory Reset iPad or iPhone 8 without iCloud Password or Apple ID?
- Title: "Crystal Lens Clearness Avoiding Videography Haze"
- Author: Christopher
- Created at : 2024-05-24 01:27:09
- Updated at : 2024-05-25 01:27:09
- Link: https://extra-hints.techidaily.com/crystal-lens-clearness-avoiding-videography-haze/
- License: This work is licensed under CC BY-NC-SA 4.0.